Zhuzhou XinHua Cemented Carbide Co., Ltd.
Zhuzhou XinHua Cemented Carbide Co., Ltd. Carbide Cutting Inserts-Turning inserts, Milling inserts, Cermet inserts and Aluminium inserts.
Add to Cart
Rough Machining Carbide Turning Inserts WNMG CNC Machine Tools
Description:
A carbide insert is a cutting tip used on a larger tipped tool whose shank is made of another material, usually carbon steel. This offers the benefits of a carbide cutting interface without the high cost and brittleness of making the entire tool out of carbide.
Aplication:
| Material | Material Characteristics |
| Carbon Steel, Alloy Steel and Tool Steel 36-48 HRC: | • Higher carbon content |
| Ferritic, Martensitic, and PH Stainless Steel under 48 HRC | • Brittle |
| Austenitic Stainless Steel: | • Becomes gummy under machining operations due to nickel content |
| Ductile and Malleable Cast Iron | • Very difficult to machine • Small depth of cut • Spherical form graphite makes machining difficult • The carbide concentration creates hard spots • The material structure is not uniform • The crater wear and flank of the insert makes machining difficult • The insert tool life is less than gray cast iron |
| Gray Cast Iron | • Flake form of graphite makes machining easy |
| The Chipbreaker Instruction of Carbide Indexable CNC Turning Inserts | |
| DF | Chip-breaker with special angle design can make cut easy,control chip and get good surface quality. |
| DM | Widely used chip-breaker is used for semi-finishing and finishing machining steel and stainless steel. |
| DR | Special chip-breaker with high toughness cutting edge can reduce cutting force. |
| PM | With stronger cutting edge,it is better for intermittent cutting than -DM,with widely cutting zone of P type material. |
| HF | With sharp cutting edge,used for finishing machining inner hole,fine finishing surface can be got with small feed rate. |
| HM | With sharp wave cutting edge to reduce cutting force,it is the first choice for semi-finishing machining of inner holes and can make chip flow smoothly. |
| HR | With tough cutting edge,used for roughing/machining of inner hole and intermittent machining workpiece with irregular surface. |
| LH | Mainly recommended for finish turning,Typical parts: Ordinary aluminum parts. |
Carbide turning inserts specifications :
| CCMT060204 | CNMG190612 | TCMT090204 | VNMG160404 |
| CCMT060208 | CNMG190616 | TCMT110204 | VNMG160408 |
| CCMT09T304 | DCMT070204 | TCMT16T304 | WNMG080404 |
| CCMT09T308 | DCMT070208 | TCMT16T308 | WNMG080408 |
| CCMT120404 | DCMT11T304 | TNMG160404 | WNMG080412 |
| CCMT120408 | DCMT11T308 | TNMG160408 | KNUX160405R11 |
| CNMG120408 | DCMT11T312 | TNMG220404 | KNUX160405L11 |
| CNMG120412 | DNMG150604 | TNMG220408 | |
| CNMG160608 | DNMG150608 | TNMG220412 | |
| CNMG160612 | DNMG150612 | VBMT160404 | |
| CNMG190608 | SNMG120408 | VBMT160408 |
Customers Feedback: