Solid Tungsten Carbide Inserts Milling Blade OFKR0704-DM CVD Coating For Mill Cutter

Solid Carbide Milling Blade OFKR0704-DM CVD Coating For Mill Cutter

Application:

This insert has an advanced hard coating made with nano technology, and superior deformation resistance and toughness with engineered carbide substrate. It is an excellent choice for medium machining of a wide variety of workpiece materials, particularly stainless steels and high-temperature alloys.

** Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
** Multi Layer coating TiN/TiC/TiCN/TiN for turning and milling carbon and alloy steels, tools steel and stainless steel.
** Provides longer tool life than uncoated grades.
** Used for difficult to cut materials.
** 26 degrees relief angle.

Indexable milling inserts 60 Degrees relief angle. Triangle positive-fully ground. Single sided without chipbreaker. Used for difficult to cut materials. Feed range .003 to .030 IPR / 0.075-0.75 mm/rev. Multi layer coating TiN/TiC/TiCN/TiN for turning and milling carbon and alloy steels, tools steel and stainless steel. Provides longer tool life than uncoated grades Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

Describtion:

ISO Type: OFKR0704-DM

Grade: YBM253 YBG202 . Chip Breaker: DM

Grade Description: nc-TiAlN nano PVD coating on ultrafine-grained carbide with high strength and toughness, a Nano Coating grade

Workpiece Material (ISO): P10-P30, M10-M30, K10-K25, S05-S20

Great welding resistance and shiny surface finishing

Longer tool life by reducing damage on the cutting edge

Great wear resistance and welding resistance

High quality surface finishing in milling process

Specification: