Uncoated Custom Carbide Inserts Steel Turning Tool LPKW130804 - X Good Rigidity

Customized Steel Turning Tool LPKW130804-X Carbide Brazed Insert Special Design from Zhuzhou​

Description:

1. 100% virgin raw material of powder for each insert to ensure you top and stable quality.

2. High technical production line to ensure delivery on time.

3. More than10,000 sets of of molds with various of types, sizes, chipbreakers and coating for customer to choice to meet customers requirements. Also we accept special design to open new mould according to customers drawings and samples.

4. Different packages :different color /brand/size of inner plastic box and outside wooden box .

5. 24 hours on line for sales and after sales service and in time technology supports.

Application:

The shape of an insert has a major influence on the impact resistance of the carbide. The weakest section of a milling insert is the corner, which is exposed to constant interrupted cuts and extreme heat changes. Since a round insert has no corners, it is more secure than any other shape.

Consider the tremendous forces that are placed on a milling insert in a typical cut. As the insert enters the cut, it is subjected to a large compressive load. The initial contact between the cutting edge and the workpiece may be very unfavorable depending on the position of the cutter in relation to the workpiece. As the insert moves through the cut, the chip thickness is constantly changing, varying the radial and axial cutting forces. Finally, as the insert leaves the workpiece, it is subjected to tensile stresses that break down the carbide. The chip bending away from the insert places large tensile or "ripping" stress on the face of the carbide.

In addition to normal milling operations, there are certain applications that are particularly damaging to carbide. Here are some of the most difficult jobs that demand a lot of strength from the shape of the insert:

• Milling of castings, where the axial depth often varies throughout the cut,
• Workpieces with hard spots or inclusions that cause unpredictable insert life,
• Raw materials that are flame or plasma cut, leaving very hard surfaces to machine,
• Forgings or castings with slag or scale on the surface that can result in the notching of the insert,
• Hardened steels, tool steels and cast irons, and Heat resistant materials like Inconel, titanium and Hastelloy.

Specification: