Zhuzhou XinHua Cemented Carbide Co., Ltd.
Zhuzhou XinHua Cemented Carbide Co., Ltd. Carbide Cutting Inserts-Turning inserts, Milling inserts, Cermet inserts and Aluminium inserts.
Add to Cart
CCMT06 Universal Carbide Turning Inserts for Steel And Stainless Steel
Describtion:
Turning tool is the most widely used tool in metal cutting without signature.It can be machined on lathe outside circle, end plane, thread, internal hole, also can be used for cutting groove and cutting.On the structure, the tool can be divided into integral tool, welding assembly tool and mechanical clamping blade.Mechanical clamping blade's turning tool can be divided into machine tool turning tool and indexable turning tool.The cutting performance of mechanical clamping tool is stable, and workers do not have to grind it, so it is applied more and more in modern production.
Application:
| The Chipbreaker Instruction of Carbide Indexable CNC Turning Inserts | |
| DF | Chip-breaker with special angle design can make cut easy,control chip and get good surface quality. |
| DM | Widely used chip-breaker is used for semi-finishing and finishing machining steel and stainless steel. |
| DR | Special chip-breaker with high toughness cutting edge can reduce cutting force. |
| PM | With stronger cutting edge,it is better for intermittent cutting than -DM,with widely cutting zone of P type material. |
| HF | With sharp cutting edge,used for finishing machining inner hole,fine finishing surface can be got with small feed rate. |
| HM | With sharp wave cutting edge to reduce cutting force,it is the first choice for semi-finishing machining of inner holes and can make chip flow smoothly. |
| HR | With tough cutting edge,used for roughing/machining of inner hole and intermittent machining workpiece with irregular surface. |
| LH | Mainly recommended for finish turning,Typical parts: Ordinary aluminum parts. |
| ISO Classification | Color | Recommend for Application |
| P01-P10 | Black+Yellow | CVD coated grade,stable conditions for steel finishing can obtain high metal removal rate.Excellent resistance to crater wear and plastic deformation resistance.Recommended for stable conditions.Wet and dry processing. |
|
P10-P20 K10-K20 |
Black+Yellow | CVD coated carbide grade,wear-resistant materials coated on the gradient substrate which has both good hardness,toughness.Can bear high temperature.For steel and steel castings finishing to roughing processing,Continue cutting to light interrupt cutting.Machining of gray and ductile iron at low to medium cutting speed. For hard materials continuous cutting and light interrupted cutting from finishing to roughing.Wet and dry processing. |
|
P10-P20 K10-K20 |
Yellow | CVD coated carbide grade,wear resistance materials coated on the gradient sintered substrate which has both good hardness,toughness.Can bear high temperature,for steel and steel castings finishing to rough processing,continue cutting to light interrupted cutting.Machining of gray and ductile iron at low to medium cutting speed.For hard materials continuous cutting and light interrupted cutting form finishing to rough,wet and dry processing. |
|
P15-P30 M10-M20 |
Black+Yellow | CVD coated carbide grade,Universal grade,suitable for steel and cast continuous cutting and interrupted cutting finishing to roughing. Grades with a wide range of application.Stainless steel continuous cutting and interrupted cutting. |
|
P15-P30 M10-M20 |
Black+Yellow | CVD coated carbide grade,universal grade,suitable for steel and cast steel continuous cutting and interrupted cutting,finishing to rough.Grades with a wide rage of applications.Stainless steel continuous cutting an d interrupted cutting. |
| P25-P40 | Black+Yellow | CVD coated carbide grade,high-strength alloy substrate with thick wear-resistant coating. Machining steel and cast steel in bad conditons. Edge line security for interrupted cutting high metal removal rate. |
Turning, also known as "turning for grinding", refers to the turning of hardened steel as the final finishing process.In general, the rough processing of hardened steel workpiece is carried out before quenching, and after quenching grinding finishing.With the development of high-hard tool materials and related technologies, PCBN tools, ceramic tools or new types of cemented carbide tools can be used to turn hardened steel in the lathe or turning processing center, and the processing quality can also reach the level of fine grinding.
Compared with CBN and ceramic materials, new cemented carbide and coated carbide tool materials have higher bending strength and impact toughness and lower price, which can be used to process hardened steel workpieces with hrc40-50 hardness.The choice of the shape of the blade and the geometrical parameters is very important to give full play to the cutting performance of the cutter.For blades of various materials, the shape of blades with high strength and good heat dissipation condition should be selected, as well as the radius of tip arc as large as possible.The main feature of the tool geometry is to select the larger negative front Angle or the pre-ground negative chamfer.
Specification:
| Description | L | øI.C | S | ød | r | Grade |
| CCMT060204-HM | 6.4 | 6.35 | 2.38 | 2.8 | 0.4 | YBC251 |
| CCMT060208-HM | 6.4 | 6.35 | 2.38 | 2.8 | 0.8 | YBC251 |
| CCMT09T304-HM | 9.7 | 9.525 | 3.97 | 4.4 | 0.4 | YBC251 |
| CCMT09T308-HM | 9.7 | 9.525 | 3.97 | 4.4 | 0.8 | YBC251 |
| CCMT120404-HM | 12.9 | 12.7 | 4.76 | 5.56 | 1.2 | YBC251 |